GuiTar kit

I  thought  about  buying  a  kit while  here  in the  UK ,it  will be  interesting  to  hear  how it  goes together  and  how  it  sounds when finished .

First day not so good deside i wanted emerald green bought stain masked off binding applied stain and about cryed guiTar body had some kind of sealer on it and did not except the stain made a huge mess the good news  is it only took 4 hrs of sanding to get back to step one i assumed when the derection said sealer they were talking clear stain instead of a hard acrylic. The direction had sugested automotive paint so now i get ot go look at paint samples and order paint  live and learn

For What It`s Worth: I used Duplicolor Auto touch up paint on a Fender Duo - Sonic. 8 coats. Simply because I wanted a one of a kind guitar.

I looked up your Saga kit and it said the top was Maple. It's not plastic. It was sealed with a polyester sanding sealer. That is why the stain won't work. If you want to stain it you have to sand it down to bare wood. I'm surprised that after the 4 hours of sanding you are not down to bare wood.

If you do want to paint over it,, Jx3's Duplicolor works great.  I can give you some more tips in a pm if you need them

Mr z guiTar was right there was n wood under the seal i black ink it and  green stain looksx awesome ecept in a few spots that rhe sealer was deeper then the maple laminente which has left a  couple of ugly yellowed spots near the bridge on volume knobs  which i think i can fix or at least make less noticeable iv been taking photos and will post work in progres thread when i figure out knew camara clould thing a Bob