• Registered: 2012-05-31
  • Posts: 4

Topic: Need help identifying this Aria Pro II solidbody guitar

Hi, I've been a long time chordie.com user, but this is my first forum post.  I bought this Aria Pro II Guitar, and I can't find any info on the web about this specific model.  Found a few that have the same body shape, but much different appointments and electronics.  This guitar is very ornate, 6 layer black and white binding around the neck and headstock, split block inlays, flame maple top.  Has the faux pearl inlay in the headstock.  The body looks like mahogany, 6 layer black and white binding around the body as well.  Has a nice patina, seems like it from at least the eighties, but I'm not sure.

It has the standard Gibson LP elecronics / pickup configuration; 2 volumes, 2 tones, a three way switch, hardtail with a tunematic type bridge.

The SN is S97059155 on the back of the headstock, and also has "Made in Korea" at the bottom of the back of the headstock.  I've owned (3) Gibson L5S guitars in my life, and this one is set up better than all of them.  The neck is dead nuts straight, intonates perfectly.

  • Registered: 2012-05-31
  • Posts: 4

Re: Need help identifying this Aria Pro II solidbody guitar

Wanted to post some pics of the Aria Pro II, how can I do that?  Thanks!

  • From: North Carolina
  • Registered: 2007-02-08
  • Posts: 1,914

Re: Need help identifying this Aria Pro II solidbody guitar

Sup Cliffhanger and welcome to the forums!!  As for adding pics, please follow this link http://www.chordie.com/forum/viewtopic.php?id=14150

[b][color=#FF0000]If your brain is part of the process, you're missing it. You should play like a drowning man, struggling to reach shore. If you can trap that feeling, then you have something.
[/color][/b]         [b]Peace of mind. That's my piece of mind...[/b]

Guitarpix's Website

  • Registered: 2012-05-31
  • Posts: 4

Re: Need help identifying this Aria Pro II solidbody guitar

link to pics:   http://www.flickr.com/photos/79768020@N06/7308982778/

  • From: North Carolina
  • Registered: 2007-02-08
  • Posts: 1,914

Re: Need help identifying this Aria Pro II solidbody guitar

Looks Like a PE-Supra model but they only come in white that I'm aware of...   They may have had different finish options in past years though...   Have you contacted Aria directly for info on it?

[b][color=#FF0000]If your brain is part of the process, you're missing it. You should play like a drowning man, struggling to reach shore. If you can trap that feeling, then you have something.
[/color][/b]         [b]Peace of mind. That's my piece of mind...[/b]

Guitarpix's Website

  • From: Almancil, Algarve, Portugal
  • Registered: 2006-09-02
  • Posts: 6,205

Re: Need help identifying this Aria Pro II solidbody guitar

Here are a couple of the images displayed here:
http://farm9.staticflickr.com/8164/7308982778_d898445329_z.jpg, http://farm9.staticflickr.com/8009/7308982698_004704d8e2_z.jpg

"Do, or do not; there is no try"

Roger Guppy's Website

  • Registered: 2012-05-31
  • Posts: 4

Re: Need help identifying this Aria Pro II solidbody guitar

those are my pics that I posted today.  I didn't see any good info on the Aria site.